Sets the number of universal terrestrial radio access (UTRA) adjacent channel offsets to be configured at offset positions, when you set the ACP Configurable Number of Offset Enabled method to True.

Syntax

Namespace: NationalInstruments.RFmx.LteMX

public int SetNumberOfUtraOffsets(string selectorString, int value)

Remarks

This method sets the value of AcpNumberOfUtraOffsets attribute. The default value is 1, when you set the CC Bandwidth to 200.0 k. The default value is 0, when you set the Band property to 46 or Duplex Scheme property to LAA. The default value is 2 for all other configurations. In case of downlink, only 3GPP specification defined values are supported. In case of non-contiguous carrier aggregation, the configured value will be used only for the outer offsets and the offset channels in the gap region are defined as per the 3GPP specification. Offset power reference for the outer UTRA offsets are set according to the value of ACP EUTRA Offset Definition property.

Parameters

NameTypeDescription
selectorStringstring

Specifies the subblock number.
Example: "subblock0".
You can use the BuildSubblockString(string, int) method to build the selector string.

valueint

Specifies the number of universal terrestrial radio access (UTRA) adjacent channel offsets to be configured at offset positions, when you set the ACP Configurable Number of Offset Enabled method to True.

Returns

Returns the status code of this method. The status code either indicates success or describes a warning condition.