Creates the list step string.

Syntax

int32 __stdcall RFmxLTE_BuildListStepString(char listName[], char resultName[], int32 stepNumber, int32 selectorStringOutLength, char selectorStringOut[])

Parameters

NameDirectionTypeDescription
listName[in]char

This parameter specifies the list name. This input accepts the list name with or without the "list::" prefix.
The default value is "" (empty string).
Example:
"list::samplelist1"
"samplelist1"

resultName[in]char

This parameter specifies the name to be associated with measurement results. Provide a unique name, such as "r1" to enable fetching of multiple measurement results and traces. This input accepts the result name with or without the "result::" prefix.
The default value is "" (empty string) for the default result instance.
Example:
"result::r1"
"r1"

stepNumber[in]int32

This parameter specifies the step number for building the selector string. The default value is 0, which corresponds to the first step. When you use -1 as the step number, all steps are considered.

selectorStringOutLength[out]int32

Specifies the length of the string that is returned by the selectorStringOut parameter. To get the minimum buffer size required to build the selector string, set the selectorStringOutLength parameter to 0.

selectorStringOut[out]char

This parameter returns the selector string created by this function.

Returns

Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError function.

The general meaning of the status code is as follows:

Value

Meaning

0

Success

Positive Values

Warnings

Negative Values

Errors