Groups

Group members

NameDescription
RFMXLTE_ATTR_MODACC_RESULTS_IN_BAND_EMISSION_MARGIN

Returns the in-band emission margin. This value is expressed in dB.

RFMXLTE_ATTR_MODACC_RESULTS_MAXIMUM_PEAK_COMPOSITE_EVM

Returns the maximum value of the peak EVMs calculated on all the configured channels over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute.

RFMXLTE_ATTR_MODACC_RESULTS_MAXIMUM_PEAK_COMPOSITE_MAGNITUDE_ERROR

Returns the peak value of the composite magnitude error calculated over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute on all the configured channels.

RFMXLTE_ATTR_MODACC_RESULTS_MAXIMUM_PEAK_COMPOSITE_PHASE_ERROR

Returns the peak value of phase error calculated over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute on all thee configured channels. This value is expressed in degrees.

RFMXLTE_ATTR_MODACC_RESULTS_MAXIMUM_PEAK_FREQUENCY_ERROR

Returns the estimated maximum carrier frequency offset per slot in case of Uplink and per subframe in case of Downlink over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute. This value is expressed in Hz.

RFMXLTE_ATTR_MODACC_RESULTS_MAXIMUM_PEAK_IQ_ORIGIN_OFFSET

Returns the estimated maximum IQ origin offset over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute. This value is expressed in dBc.

RFMXLTE_ATTR_MODACC_RESULTS_MEAN_FREQUENCY_ERROR

Returns the estimated carrier frequency offset averaged over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute. This value is expressed in Hz.

RFMXLTE_ATTR_MODACC_RESULTS_MEAN_IQ_GAIN_IMBALANCE

Returns the estimated I/Q gain imbalance averaged over the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH. The I/Q gain imbalance is the ratio of the amplitude of the I component to the Q component of the I/Q signal being measured. This value is expressed in dB.

RFMXLTE_ATTR_MODACC_RESULTS_MEAN_IQ_ORIGIN_OFFSET

Returns the estimated I/Q origin offset averaged over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute. This value is expressed in dBc.

RFMXLTE_ATTR_MODACC_RESULTS_MEAN_IQ_TIMING_SKEW

Returns the estimated IQ timing skew averaged over measured length. IQ timing skew is the difference between the group delay of the in-phase (I) and quadrature (Q) components of the signal. This value is expressed in seconds.

RFMXLTE_ATTR_MODACC_RESULTS_MEAN_QUADRATURE_ERROR

Returns the estimated quadrature error averaged over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute. This value is expressed in degrees.

RFMXLTE_ATTR_MODACC_RESULTS_MEAN_RMS_COMPOSITE_EVM

Returns the mean value of the RMS EVMs calculated on all the configured channels, over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute.

RFMXLTE_ATTR_MODACC_RESULTS_MEAN_RMS_COMPOSITE_MAGNITUDE_ERROR

Returns the RMS mean value of the composite magnitude error calculated over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute on all the configured channels.

RFMXLTE_ATTR_MODACC_RESULTS_MEAN_RMS_COMPOSITE_PHASE_ERROR

Returns the RMS mean value of the composite phase error calculated over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute on all the configured channels. This value is expressed in degrees.

RFMXLTE_ATTR_MODACC_RESULTS_MEAN_SYMBOL_CLOCK_ERROR

Returns the estimated symbol clock error averaged over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute. This value is expressed in ppm.

RFMXLTE_ATTR_MODACC_RESULTS_MEAN_TIME_OFFSET

Returns the time difference between the detected slot or frame boundary and the reference trigger location depending on the value of RFMXLTE_ATTR_MODACC_SYNCHRONIZATION_MODE attribute. This value is expressed in seconds.

RFMXLTE_ATTR_MODACC_RESULTS_PEAK_COMPOSITE_EVM_SLOT_INDEX

Returns the slot index where the RFMXLTE_ATTR_MODACC_RESULTS_MAXIMUM_PEAK_COMPOSITE_EVM occurs.

RFMXLTE_ATTR_MODACC_RESULTS_PEAK_COMPOSITE_EVM_SUBCARRIER_INDEX

Returns the subcarrier index where the RFMXLTE_ATTR_MODACC_RESULTS_MAXIMUM_PEAK_COMPOSITE_EVM for ModAcc occurs.

RFMXLTE_ATTR_MODACC_RESULTS_PEAK_COMPOSITE_EVM_SYMBOL_INDEX

Returns the symbol index of the RFMXLTE_ATTR_MODACC_RESULTS_MAXIMUM_PEAK_COMPOSITE_EVM attribute.

RFMXLTE_ATTR_MODACC_RESULTS_SUBBLOCK_MEAN_IQ_GAIN_IMBALANCE

Returns the estimated I/Q gain imbalance averaged over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute. This value is expressed in dB. The I/Q gain imbalance is the ratio of the amplitude of the I component to the Q component of the I/Q signal being measured in the subblock.

RFMXLTE_ATTR_MODACC_RESULTS_SUBBLOCK_MEAN_IQ_ORIGIN_OFFSET

Returns the estimated I/Q origin offset averaged over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute in the subblock. This value is expressed in dBc.

RFMXLTE_ATTR_MODACC_RESULTS_SUBBLOCK_MEAN_QUADRATURE_ERROR

Returns the estimated quadrature error averaged over the slots specified by the RFMXLTE_ATTR_MODACC_MEASUREMENT_LENGTH attribute. This value is expressed in degrees. Quadrature error is a measure of the skewness of the I component with respect to the Q component of the I/Q signal being measured in the subblock.

Attachments

None