Advanced

Specifies whether RFmx optimizes the acquisition bandwidth. This may cause acquisition center frequency or local oscillator (LO) to be placed at different position than you configured.

Specifies the initial reference level that the RFmxLTE_AutoLevel function uses to estimate the peak power of the input signal. This value is expressed in dBm.

Specifies the frequency that determines the SEM mask, IBE limits, and spectral flatness ranges. If you do not set a value for this attribute, the measurement internally uses the RFMXLTE_ATTR_CENTER_FREQUENCY for determining SEM mask, IBE limits, and spectral flatness ranges. This value is expressed in Hz.

Specifies the set of attributes that are considered by RFmx in the locked signal configuration state.

Specifies the RF architecture at the transmitter in case of a multicarrier. 3GPP defines different options, each component carriers within a subblock can have separate LO or one common LO for an entire subblock. Based upon the selected option, the additional results are calculated.