Specifies the number of universal terrestrial radio access (UTRA) adjacent channel offsets to be configured at offset positions, when you set the RFMXLTE_ATTR_ACP_CONFIGURABLE_NUMBER_OF_OFFSETS_ENABLED attribute to True.

Syntax

RFMXLTE_ATTR_ACP_NUMBER_OF_UTRA_OFFSETS

Numeric Value

Data Type

Access

Applies To

3149882

int32

Read/Write

Subblock

Remarks


Use "subblock<n>" as the selector string to configure or read this attribute.

The default value is 1, when you set the RFMXLTE_ATTR_COMPONENT_CARRIER_BANDWIDTH to 200.0 k.

The default value is 0, when you set the RFMXLTE_ATTR_BAND attribute to 46 or RFMXLTE_ATTR_ACP_EUTRA_OFFSET_DEFINITION attribute to LAA.

The default value is 2 for all other configurations.
Note

In case of downlink, only 3GPP specification defined values are supported. In case of non-contiguous carrier aggregation, the configured value will be used only for the outer offsets and the offset channels in the gap region are defined as per the 3GPP specification. Offset power reference for the outer UTRA offsets are set according to the value of RFMXLTE_ATTR_ACP_EUTRA_OFFSET_DEFINITION attribute.