Returns the signal names and the corresponding selected personality type from the Personality Filter parameter.


icon

Inputs/Outputs

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In identifies the instrument session. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI or the RFmxInstr Initialize NIRFSA (Array) VI.

  • ci32.png Personality Filter —

    Personality Filter specifies the personality filter to get the signal configuration names. You can specify one or more of the following personalities. The default value is All.

    SpecAn (1)

    Specifies the SpecAn personality.
    Demod (2)

    Specifies the Demod personality.
    LTE (4)

    Specifies the LTE personality.
    GSM (8)

    Specifies the GSM personality.
    WCDMA (16)

    Specifies the WCDMA personality.
    CDMA2k (32)

    Specifies the CDMA2k personality.
    TDSCDMA (64)

    Specifies the TD-SCDMA personality.
    EVDO (128)

    Specifies the EV-DO personality.
    NR (256)

    Specifies the NR personality.
    WLAN (512)

    Specifies the WLAN personality.
    BT (1024)

    Specifies the BT personality.
    All (2147483647)

    Specifies all the personalities.
  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of the instrument session to the next VI.

  • i1dstr.png Signal Names —

    Signal Names returns an array of the signal names.

  • i1di32.png Personalities —

    Personalities returns an array of personalities where each entry corresponds to the personality of each signal name in the Signal Names array.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.