Specifies whether to enable the LO OUT terminals on the installed devices.

Syntax

RFMXINSTR_ATTR_LO_EXPORT_ENABLED

Numeric Value

Data Type

Access

Applies To

33

int32

Read/Write

Lo

Remarks

Name (value)

Description

TRUE

Enables the LO OUT terminals.

FALSE

Disables the LO OUT terminals

For PXIe-5830/5831/5832, if you want to configure or read on LO1 or LO2 channel, use "lo1" or "lo2" as part of the selector string. You do not need to use a selector string or use "lo1, lo2" as part of the selector string if you want to configure this attribute for both channels. You can also use RFmxInstr_BuildLOString utility function to create the LO String. For all other devices, lo channel string is not allowed.
Note

This attribute is not supported on a MIMO session.

You do not need to use a selector string if you want to configure this attribute for all signal instances. Specify the signal name in the selector string if you want to configure or read on that signal instance. Refer to the Selector String topic for information about the string syntax.

Default value:

  • PXIe-5663/5663E: TRUE  

  • PXIe-5644/5645/5646, PXIe-5665/5668, PXIe-5830/5831/5832/5840/5841/5842: FALSE

Supported devices: PXIe-5644/5645/5646, PXIe-5663/5663E/5665/5668, PXIe-5830/5831/5832/5840/5841/5842