Specifies a comma-separated list of the terminals at which to export the frequency reference.

Syntax

RFMXINSTR_ATTR_FREQUENCY_REFERENCE_EXPORTED_TERMINAL

Numeric Value

Data Type

Access

Applies To

34

char[]

Read/Write

N/A

Remarks

Note

This attribute is not supported on a MIMO session.

You do not need to use a selector string if you want to configure this attribute for all signal instances. Specify the signal name in the selector string if you want to configure or read that signal instance. Refer to the Selector String topic for information about the string syntax.

The default value is None.

Supported devices: PXIe-5644/5645/5646, PXIe-5663/5663E/5665/5668, PXIe-5820/5830/5831/5832/5840/5841/5842/5860

Name

Value

Description

RFMXINSTR_VAL_NONE_STR

The Reference Clock is not exported. This value is not valid for the PXIe-5644/5645/5646.

RFMXINSTR_VAL_REF_OUT_STR

RefOut

Export the clock on the REF IN/OUT terminal on the PXIe-5652, the REF OUT terminals on the PXIe-5653, or the REF OUT terminal on the PXIe-5694, PXIe-5644/5645/5646, or PXIe-5820/5830/5831/5832/5840/5841/5860.

RFMXINSTR_VAL_REF_OUT2_STR

RefOut2

Export the clock on the REF OUT2 terminal on the PXIe-5652. This value is valid only for the PXIe-5663E.

RFMXINSTR_VAL_CLK_OUT_STR

ClkOut

Export the Reference Clock on the CLK OUT terminal on the Digitizer. This value is not valid for the PXIe-5644/5645/5646 or PXIe-5820/5830/5831/5832/5840/5841/5842/5860.