Configures the synchronization mode, measurement offset, and measurement length.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Examples:

    ""

    "signal::sig1"

    You can use the RFmxEVDO Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • ci32.png Synchronization Mode —

    Synchronization Mode specifies whether the measurement is performed from the frame or the slot boundary. The default value is Slot.

    Frame (0)

    The frame boundary is detected, and the measurement is performed over the number of slots specified by the SlotPhase Meas Length property starting at SlotPhase Meas Offset slots from the frame boundary.

    Slot (1)

    The slot boundary is detected and the measurement is performed over the number of slots specified by SlotPhase Measurement Length number of slots, starting at SlotPhase Measurement Offset slots from the slot boundary.

  • ci32.png Measurement Offset (slots) —

    Measurement Offset specifies the measurement offset to skip from the synchronization boundary. This value is expressed in slots. The synchronization boundary is specified by the SlotPhase Sync Mode property. The default value is 0.

  • ci32.png Measurement Length (slots) —

    Measurement Length specifies the duration of the SlotPhase measurement. This value is expressed in slots. The default value is 16.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.