Configures the subtype of the EV-DO signal.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Examples:

    ""

    "signal::sig1"

    You can use the RFmxEVDO Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • ci32.png Physical Layer Subtype —

    Physical Layer Subtype specifies the EV-DO physical layer subtype. The default value is 0, 1.

    0,1(0) Specifies subtype 0, 1. 3GPP2 C.S0024-B v3.0 defines this subtype in 10 DEFAULT (SUBTYPE 0) AND SUBTYPE 1 PHYSICAL LAYER PROTOCOL.
    2(1) Specifies subtype 2. 3GPP2 C.S0024-B v3.0 defines this subtype in 11 SUBTYPE 2 PHYSICAL LAYER.
    3(2) Specifies subtype 3. 3GPP2 C.S0024-B v3.0 defines this subtype in 12 SUBTYPE 3 PHYSICAL LAYER.
  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.