Use the VIs on this palette to configure RFmxEVDO measurements. You can use the RFmxEVDO Property Node to configure additional properties.

RFmxEVDO Configure RF VI
Configures the RF properties of the signal specified by the Selector String parameter.
RFmxEVDO Configure Frequency VI
Configures the expected carrier frequency of the RF signal to acquire according to the Center Frequency value in Hz or according to the Channel Number and Band parameters. The signal analyzer tunes to this frequency.
RFmxEVDO Configure Reference Level VI
Configures the reference level. The reference level represents the maximum expected power of an input RF signal.
RFmxEVDO Auto Level VI
Examines the input signal to calculate the peak power level and sets it as the value of the Reference Level property. Use this VI to help calculate an approximate setting for the reference level.
RFmxEVDO Configure External Attenuation VI
Specifies external attenuation to be considered by RFmx EV-DO measurements, such as the attenuation of a switch or cable connected to the signal analyzer RF IN connector.
RFmxEVDO Configure Trigger VI
Configures the Reference Trigger to use to acquire the signal.
RFmxEVDO Send Software Edge Trigger VI
Sends a trigger to the device when you use the RFmxEVDO Configure Trigger VI to choose a software version of a trigger and the device is waiting for the trigger to be sent. You can also use this VI to override a hardware trigger.
RFmxEVDO Configure Number of Carriers VI
Configures the number of carriers for the analysis of the EV-DO signal.
RFmxEVDO Configure Carrier Frequency VI
Configures the carrier frequency of the selected carrier as an offset frequency relative to the center frequency. Use "carrier <n> " as the selector string to configure this VI.
RFmxEVDO Configure Contiguous Carriers VI
Configures a number of contiguous carriers in a given band.
RFmxEVDO Configure Band Class VI
Configures the band class to be used for the measurement.
RFmxEVDO Configure Physical Layer Subtype VI
Configures the subtype of the EV-DO signal.
RFmxEVDO Configure Uplink Spreading VI
Configures the spreading of the EV-DO uplink.
RFmxEVDO Configure Channel Configuration Mode VI
Configures RFmx EV-DO to detect the channels automatically or to use a specified channel configuration.
RFmxEVDO Configure Uplink Data Modulation Type VI
Configures RFmx EV-DO to detect the channels automatically or to use a specified data modulation type.
RFmxEVDO Configure Uplink Number of Channels VI
Configures the number of channels in the EV-DO uplink.
RFmxEVDO Configure Uplink User Defined Channel VI
Configures a user defined channel in the EV-DO uplink specified by the selector string. Use "channel<n>" as the selector string to configure this VI.
Array VIs
Use the VIs on this palette to configure measurements requiring an array of properties. You can use the RFmxEVDO Property Node to configure additional properties.
RFmxEVDO Build Carrier String VI
Creates the carrier string to use as the selector string with the adjacent channel power (ACP), channel power (CHP), and spectral emission mask (SEM) carrier configuration or fetch properties and VIs.
RFmxEVDO Build Channel String VI
Creates the channel string to use as the selector string with the modulation accuracy (ModAcc) channel configuration or fetch properties and VIs.
ModAcc
Use the VIs on this palette to configure modulation accuracy (ModAcc) measurements. You can use the RFmxEVDO Property Node to configure additional properties.
ACP
Use the VIs on this palette to configure adjacent channel power (ACP) measurements. You can use the RFmxEVDO Property Node to configure additional properties.
CHP
Use the VIs on this palette to configure channel power (CHP) measurements. You can also use the RFmxEVDO Property Node to configure additional properties.
OBW
Use the VIs on this palette to configure occupied bandwidth (OBW) measurements. You can also use the RFmxEVDO Property Node to configure additional properties.
SEM
Use the VIs on this palette to configure spectral emission mask (SEM) measurements. You can also use the RFmxEVDO Property Node to configure additional properties.
CDA
Use the VIs on this palette to configure CDA measurement. You can use the RFmxEVDO Property Node to configure additional properties.
SlotPhase
Use the VIs on this palette to configure SlotPhase measurement. You can use the RFmxEVDO Property Node to configure additional properties.
SlotPower
Use the VIs on this palette to configure SlotPower measurement. You can use the RFmxEVDO Property Node to configure additional properties.

Parent topic: EVDO

RFmx EV-DO LabVIEW Reference

Log in to get a better experience