Enables all the measurements that you specify in the Measurements parameter and disables all other measurements.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String comprises of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Example:

    ""

    "signal::sig1"

    You can use the RFmxDemod Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • c1denum.png Measurements —

    Measurements specifies an array of measurements to perform. You can specify the following measurements.

    ADemod (0)

    Enables analog demodulation measurements.
    DDemod (1)

    Enables digital demodulation measurements.
  • cbool.png Enable All Traces —

    Enable All Traces specifies whether to enable all the traces for the selected measurements.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.