RFmxDemod_CfgFrequency
- Updated2025-10-13
- 1 minute(s) read
Configures the expected carrier frequency of the RF signal that needs to be acquired. The signal analyzer tunes to this frequency.
Syntax
int32 __stdcall RFmxDemod_CfgFrequency(niRFmxInstrHandle instrumentHandle, char selectorString[], float64 centerFrequency)
Parameters
| Name | Direction | Type | Description |
|---|---|---|---|
| instrumentHandle | [in] | niRFmxInstrHandle | This parameter specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr_Initialize function. |
| selectorString | [in] | char[] | This parameter comprises of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string). Example: "" "signal::sig1" You can use the RFmxDemod_BuildSignalString function to build the Selector String. |
| centerFrequency | [in] | float64 | This parameter specifies the carrier frequency, in Hz, of the RF signal that needs to be acquired. The signal analyzer tunes to this frequency. The default of this attribute is hardware dependent. |
Returns
Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.
To obtain a text description of the status code and additional information about the error condition, call the RFmxDemod_GetError function.
The general meaning of the status code is as follows:
Value | Meaning |
|---|---|
0 | Success |
Positive Values | Warnings |
Negative Values | Errors |