Synchronization

Specifies the synchronization bits used to create the reference sequence that must be located in the demodulated signal. The synchronization bits are modulated based on the modulation type to create the reference sequence.

Specifies whether the demodulator needs to search and synchronize the signal to a known reference sequence. The reference sequence is the symbol representation of a defined set of bits known to be present in the transmitted signal. If the synchronization is found in the demodulated signal, the measurement is performed from this point onward. If the synchronization is not found, the entire signal is used for the measurement.

Specifies the offset, which is the location from which the signal is considered for further measurements. The offset is specified in symbols of the reference sequence. This offset is not applicable when the synchronization bits are not found.