Channel:Configuration Mode
- Updated2025-04-08
- 1 minute(s) read
Specifies whether to detect the channels automatically or to use a specified channel configuration.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is Auto Detect.
Remarks
The following table lists the characteristics of this property.
Short Name | Channel Configuration Mode |
Data type | ![]() |
Permissions | Read/Write |
High-level VIs | RFmxCDMA2k Configure Channel Configuration Mode |
Resettable | Yes |
Auto Detect | 0 | Specifies that the system automatically detects the channels. |
User Defined | 1 | Specifies that the system uses a specific channel configuration. |