Packet Settings:Channel Sounding:Sequence Marker Signals []
- Updated2025-04-08
- 1 minute(s) read
Specifies an array of sounding sequence marker signals. This property is applicable only when you set the CS SYNC Sequence to Sounding Sequence.
When sounding sequence length property is set to 32, only the first element shall be inserted in the sounding sequence, and remaining elements shall be discarded.
When sounding sequence length property is set to 96, up to the first two elements shall be inserted in the sounding sequence, and remaining elements shall be discarded.
The default value is 1100.
Remarks
The following table lists the characteristics of this property.
| Short Name | Sounding Sequence Marker Signals [] |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |
| 1100 | 0 | Specifies that the sounding sequence marker signal inserted in the sounding sequence is 1100. |
| 0011 | 1 | Specifies that the sounding sequence marker signal inserted in the sounding sequence is 0011. |