Impairments:IQ Impairments:I DC Offset (%)
- Updated2025-04-08
- 1 minute(s) read
Specifies the value of the DC offset in the in-phase (I) signal as a percentage of the peak magnitude of the complex I/Q signal.
The default value is 0. Valid values are -100 to 100, inclusive.
Remarks
The following table lists the characteristics of this property.
| Short Name | I DC Offset (%) |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | niBT SG Set I DC Offset |
| Resettable | Yes |