Packet Settings:Payload Header:FLOW
- Updated2025-04-08
- 1 minute(s) read
Specifies the value for the flow control bit in the payload header. This field controls the 1-bit flow control parameter in the packet.
The default value is 0. Valid values are 0, which indicates a Stop condition, and 1, which indicates a Go condition.
Remarks
The following table lists the characteristics of this property.
| Short Name | Payload Header FLOW |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | niBT SG Set Payload Header FLOW |
| Resettable | Yes |