Advanced: Sample Clock Rate Factor Property

Advanced: Sample Clock Rate Factor Property

Short Name: Sample Clock Rate Factor

Property of RFmxWLAN

Specifies the factor by which the sample clock rate is multiplied at the transmitter to generate a signal compressed in the frequency domain and expanded in the time domain.

For example, a 40 MHz signal can be compressed to 20 MHz in the frequency domain if the sample clock rate is reduced to half at the transmitter. In this case, you must set this property to 0.5 to demodulate the signal.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

The default value is 1.

The valid values are 0.001 to 1, inclusive.

Remarks

The following table lists the characteristics of this property.

Datatype
Permissions	Read/Write
High-level VIs	N/A
Resettable	Yes