OFDM:Advanced:PPDU Type Property
- Updated2024-04-10
- 2 minute(s) read
OFDM:Advanced:PPDU Type Property
Short Name: OFDM PPDU Type
Property of RFmxWLAN
Specifies the PPDU type when you set the OFDM Auto PPDU Type Detection Enabled property to False.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is Non-HT.
| Non-HT (0) |
Specifies an 802.11a, 802.11j, or 802.11p PPDU type, or 802.11n, 802.11ac, or 802.11ax PPDU type when operating in the Non-HT mode. |
| Mixed (1) |
Specifies the HT-Mixed PPDU (802.11n) type. |
| Greenfield (2) |
Specifies the HT-Greenfield PPDU (802.11n) type. |
| SU (3) |
Specifies the VHT SU PPDU type if you set the Standard property to 802.11ac or the HE SU PPDU type if you set the Standard property to 802.11ax. |
| MU (4) |
Specifies the VHT MU PPDU type if you set the Standard property to 802.11ac, the HE MU PPDU type if you set the Standard property to 802.11ax, or the EHT MU PPDU type if you set the Standard property to 802.11be. |
| Extended Range SU (5) |
Specifies the HE Extended Range SU PPDU (802.11ax) type. |
| Trigger-based (6) |
Specifies the HE TB PPDU if you set the Standard property to 802.11ax or the EHT TB PPDU if you set the Standard property to 802.11be. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |