Auto Detect Signal:Detected Standard Property
- Updated2024-04-10
- 2 minute(s) read
Auto Detect Signal:Detected Standard Property
Short Name: Detected Standard
Property of RFmxWLAN
Returns the standard detected by the RFmxWLAN Auto Detect Signal VI.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
| Unknown (-1) |
Indicates that the standard is not detected. |
| 802.11a/g (0) |
Corresponds to the OFDM based PPDU formats as defined in IEEE Standard 802.11a 1999 and IEEE Standard 802.11g-2003. |
| 802.11b (1) |
Corresponds to the DSSS based PPDU formats as defined in IEEE Standard 802.11b 1999. |
| 802.11j (2) |
Corresponds to the OFDM based PPDU formats as defined in IEEE Standard 802.11j 2004. |
| 802.11p (3) |
Corresponds to the OFDM based PPDU formats as defined in IEEE Standard 802.11p 2010. |
| 802.11n (4) |
Corresponds to the OFDM based PPDU formats as defined in IEEE Standard 802.11n 2009. |
| 802.11ac (5) |
Corresponds to the OFDM based PPDU formats as defined in IEEE Standard 802.11ac 2013. |
| 802.11ax (6) |
Corresponds to the OFDM based PPDU formats as defined in IEEE Standard P802.11ax/D8.0. |
| 802.11be (7) |
Corresponds to the OFDM based PPDU formats as defined in IEEE Standard P802.11be/D5.0.1. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read Only |
| High-level VIs | N/A |
| Resettable | No |