RFmxVnaMX.GetPulseGeneratorDelay Method

public int GetPulseGeneratorDelay(
	string selectorString,
	out double value
)

Public Function GetPulseGeneratorDelay ( 
	selectorString As String,
	<OutAttribute> ByRef value As Double
) As Integer

Parameters

selectorString  String

Specifies the pulsegen number and signal number.
Example:
"signal0" or
"signal0/pulsegen0".
You can use the BuildPulseGeneratorString(String, Int32) method to build the selector string.

value  Double

Upon return, contains the delay in the start of the pulse generator relative to the internal pulse trigger. The internal pulse trigger could either be generated independently by the VNA based on the PulsePeriod method or derived from an external pulse trigger that you specify using the PulseDigitalEdgeTriggerSource method. You must set the values of the Pulse Generator Delay (s) method and PulseGeneratorWidth method such that Delay + Width does not exceed the value of PulsePeriod method. This value is expressed in seconds.

Return Value

Reference