RFmxVnaMX.GetSegmentTestReceiverAttenuation Method

public int GetSegmentTestReceiverAttenuation(
	string selectorString,
	out double value
)

Public Function GetSegmentTestReceiverAttenuation ( 
	selectorString As String,
	<OutAttribute> ByRef value As Double
) As Integer

Parameters

selectorString  String

Specifies the segment number, signal number and port number.
Example:
"segment0" or
"signal0" or
"port0" or
"signal0/segment0/port0".
You can use the BuildPortString(String, String) method to build the selector string.

value  Double

Upon return, contains the test receiver attenuation for the selected segment and VNA port when Segment Test Receiver Attenuation Enabled method is set to True. This is the attenuation value that the VNA uses to attenuate the RF signal before it reaches the downconverting mixer on the path towards the Test Receiver. For each VNA port, the receiver that measures waves traveling away from the DUT port and towards the VNA port is referred to as the Test Receiver. This value is expressed in dB.

Return Value

Reference