RFmxVnaMX.GetDwellTime Method

public int GetDwellTime(
	string selectorString,
	out double value
)

Public Function GetDwellTime ( 
	selectorString As String,
	<OutAttribute> ByRef value As Double
) As Integer

Parameters

selectorString  String

Specifies the segment number and signal number.
Example:
"signal0" or
"signal0/segment0".
You can use the BuildSegmentString(String, Int32) method to build the selector string.

value  Double

Upon return, contains the time for which the analyzer waits before acquiring the signal for each measured frequency point. Use dwell time when measuring devices with substantial electrical lengths, requiring compensation for the delay between frequency changes at the generator and their observation at the analyzer. This value is expressed in seconds.

Return Value

Reference