RFmxVnaMX.SetDwellTime Method

public int SetDwellTime(
	string selectorString,
	double value
)

Public Function SetDwellTime ( 
	selectorString As String,
	value As Double
) As Integer

Parameters

selectorString  String

Specifies the segment number and signal number.
Example:
"signal0" or
"signal0/segment0".
You can use the BuildSegmentString(String, Int32) method to build the selector string.

value  Double

Specifies the time for which the analyzer waits before acquiring the signal for each measured frequency point. Use dwell time when measuring devices with substantial electrical lengths, requiring compensation for the delay between frequency changes at the generator and their observation at the analyzer. This value is expressed in seconds.

Return Value

Reference