RFmxVNA_CalkitManagerCalkitCalibrationElementSParameterSetS21
- Updated2024-10-21
- 1 minute(s) read
RFmxVNA_CalkitManagerCalkitCalibrationElementSParameterSetS21
int32 __stdcall RFmxVNA_CalkitManagerCalkitCalibrationElementSParameterSetS21 (niRFmxInstrHandle instrumentHandle, char selectorString[], NIComplexDouble s21[], int32 arraySize);
Purpose
Sets the S21 S-Parameter for the calibration element.
Parameters
| Input | ||
| Name | Type | Description |
| instrumentHandle | niRFmxInstrHandle | Specifies the RFmx session refnum.
|
| selectorString | char[] | Specifies the selector string created by this function. The selector string comprises of the Calkit ID and the Calibration Element ID.
Example: "ckit::MyCkitID/calel::MyCalelID" You can use the RFmxVNA_CalkitManagerBuildCalkitCalibrationElementString function to build the selector string. |
| s21 | NIComplexDouble[] | Specifies the S21 S-Parameter for the calibration element.
|
| arraySize | int32 | Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter. |
Return Value
| Name | Type | Description | ||||||||
| status | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the RFmxVNA_GetError function. The general meaning of the status code is as follows:
|
||||||||