ACP:Noise Compensation Enabled Property
- Updated2023-10-12
- 1 minute(s) read
ACP:Noise Compensation Enabled Property
Short Name: ACP Noise Comp Enabled
Property of RFmxTDSCDMA
Specifies whether to enable compensation of the channel powers for the inherent noise floor of the signal analyzer.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is False.
| False (0) |
Disables compensation of the channel powers for the signal analyzer noise floor. |
| True (1) |
Enables compensation of the channel powers for the signal analyzer noise floor. The noise floor of the signal analyzer is measured for the RF path used by the ACP measurement and cached for future use. If signal analyzer or measurement parameters change, noise floors are remeasured. Supported Devices: PXIe-5663/5665/5668R/5830/5831/5832/5842 |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | RFmxTDSCDMA ACP Configure Noise Compensation Enabled |
| Resettable | Yes |