Trigger:IQ Power Edge:Slope Property
- Updated2023-10-12
- 1 minute(s) read
Trigger:IQ Power Edge:Slope Property
Short Name: IQ Power Edge Slope
Property of RFmxTDSCDMA
Specifies whether the device asserts the trigger when the signal power is rising or when the signal power is falling. The device asserts the trigger when the signal power exceeds the specified level with the slope you specify. This property is used only when you set the Trigger Type property to IQ Power Edge.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is Rising Slope.
| Rising Slope (0) |
The trigger asserts when the signal power is rising. |
| Falling Slope (1) |
The trigger asserts when the signal power is falling. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | RFmxTDSCDMA Configure Trigger |
| Resettable | Yes |