RFmxTdscdmaMXObwResults.FetchMeasurement Method

public int FetchMeasurement(
	string selectorString,
	double timeout,
	out double occupiedBandwidth,
	out double absolutePower,
	out double startFrequency,
	out double stopFrequency
)

Public Function FetchMeasurement ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef occupiedBandwidth As Double,
	<OutAttribute> ByRef absolutePower As Double,
	<OutAttribute> ByRef startFrequency As Double,
	<OutAttribute> ByRef stopFrequency As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name. If you do not specify the result name, the default result instance is used.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

occupiedBandwidth

Type: SystemDouble
Upon return, contains the OBW. This value is expressed in Hz. The OBW is calculated using the following formula: OBW = Stop Frequency - Start Frequency.

absolutePower

Type: SystemDouble
Upon return, contains the total integrated power of the averaged spectrum acquired by the OBW measurement. This value is expressed in dBm.

startFrequency

Type: SystemDouble
Upon return, contains the start frequency of the OBW. This value is expressed in Hz.

stopFrequency

Type: SystemDouble
Upon return, contains the stop frequency of the OBW. This value is expressed in Hz.

Return Value

Reference