RFmxTdscdmaMXSemResults.FetchUpperOffsetPowerArray Method

public int FetchUpperOffsetPowerArray(
	string selectorString,
	double timeout,
	ref double[] absoluteIntegratedPower,
	ref double[] relativeIntegratedPower,
	ref double[] absolutePeakPower,
	ref double[] peakFrequency,
	ref double[] relativePeakPower
)

Public Function FetchUpperOffsetPowerArray ( 
	selectorString As String,
	timeout As Double,
	ByRef absoluteIntegratedPower As Double(),
	ByRef relativeIntegratedPower As Double(),
	ByRef absolutePeakPower As Double(),
	ByRef peakFrequency As Double(),
	ByRef relativePeakPower As Double()
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name. If you do not specify the result name, the default result instance is used.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

absoluteIntegratedPower

Type: SystemDouble
Upon return, contains the array of upper (positive) offset segment powers measured. This value is expressed in dBm.

relativeIntegratedPower

Type: SystemDouble
Upon return, contains the array of powers measured in each positive offset segment relative to the integrated power of the reference carrier. This value is expressed in dB.

absolutePeakPower

Type: SystemDouble
Upon return, contains the array of peak powers measured in each upper (positive) offset segment. This value is expressed in dBm.

peakFrequency

Type: SystemDouble
Upon return, contains the array of frequencies at which the peak power occurred in each offset segment. This value is expressed in Hz.

relativePeakPower

Type: SystemDouble
Upon return, contains the array of peak powers measured in each upper (positive) offset segment relative to the integrated power of the reference carrier.

Return Value

Reference