RFmxTdscdmaMXSemResults.FetchLowerOffsetPowerArray Method

public int FetchLowerOffsetPowerArray(
	string selectorString,
	double timeout,
	ref double[] absoluteIntegratedPower,
	ref double[] relativeIntegratedPower,
	ref double[] absolutePeakPower,
	ref double[] peakFrequency,
	ref double[] relativePeakPower
)

Public Function FetchLowerOffsetPowerArray ( 
	selectorString As String,
	timeout As Double,
	ByRef absoluteIntegratedPower As Double(),
	ByRef relativeIntegratedPower As Double(),
	ByRef absolutePeakPower As Double(),
	ByRef peakFrequency As Double(),
	ByRef relativePeakPower As Double()
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name. If you do not specify the result name, the default result instance is used.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

absoluteIntegratedPower

Type: SystemDouble
Upon return, contains the array of lower (negative) offset segment powers measured. This value is expressed in dBm.

relativeIntegratedPower

Type: SystemDouble
Upon return, contains the array of powers in each negative offset segment relative to the integrated power of the reference carrier. This value is expressed in dB.

absolutePeakPower

Type: SystemDouble
Upon return, contains the array of peak powers measured in each lower (negative) offset segment. This value is expressed in dBm.

peakFrequency

Type: SystemDouble
Upon return, contains the array of frequencies at which the peak power occurred in each offset segment. This value is expressed in Hz.

relativePeakPower

Type: SystemDouble
Upon return, contains the array of peak powers in the lower (negative) offset segment relative to the integrated power of the reference carrier.

Return Value

Reference