RFmxTdscdmaMXPvtResults.FetchSignalPowerTrace Method

public int FetchSignalPowerTrace(
	string selectorString,
	double timeout,
	ref AnalogWaveform<float> signalPower,
	ref AnalogWaveform<float> absoluteLimit
)

Public Function FetchSignalPowerTrace ( 
	selectorString As String,
	timeout As Double,
	ByRef signalPower As AnalogWaveform(Of Single),
	ByRef absoluteLimit As AnalogWaveform(Of Single)
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name. If you do not specify the result name, the default result instance is used.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

signalPower

Type: NationalInstrumentsAnalogWaveformSingle
Upon return, contains the measured signal power over a specified period of time.

absoluteLimit

Type: NationalInstrumentsAnalogWaveformSingle
Upon return, contains the power limit as defined by the transmit ON/OFF time mask in the 3GPP TS 34.122 specification.

Return Value

Reference