RFmxTdscdmaMXSemResults.FetchLowerOffsetPower Method

public int FetchLowerOffsetPower(
	string selectorString,
	double timeout,
	out double absoluteIntegratedPower,
	out double relativeIntegratedPower,
	out double absolutePeakPower,
	out double peakFrequency,
	out double relativePeakPower
)

Public Function FetchLowerOffsetPower ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef absoluteIntegratedPower As Double,
	<OutAttribute> ByRef relativeIntegratedPower As Double,
	<OutAttribute> ByRef absolutePeakPower As Double,
	<OutAttribute> ByRef peakFrequency As Double,
	<OutAttribute> ByRef relativePeakPower As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name, and offset number. If you do not specify the result name, the default result instance is used.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

absoluteIntegratedPower

Type: SystemDouble
Upon return, contains the lower (negative) offset segment power measured. This value is expressed in dBm.

relativeIntegratedPower

Type: SystemDouble
Upon return, contains the power in the negative offset segment relative to the integrated power of the reference carrier. This value is expressed in dB.

absolutePeakPower

Type: SystemDouble
Upon return, contains the peak power measured in the lower (negative) offset segment. This value is expressed in dBm.

peakFrequency

Type: SystemDouble
Upon return, contains the frequency at which the peak power occurred in the offset segment. This value is expressed in Hz.

relativePeakPower

Type: SystemDouble
Upon return, contains the peak power in the lower (negative) offset segment relative to the integrated power of the reference carrier.

Return Value

Reference