RFmxTDSCDMA_SetAttributeI8
- Updated2024-10-14
- 1 minute(s) read
RFmxTDSCDMA_SetAttributeI8
int32 __stdcall RFmxTDSCDMA_SetAttributeI8 (niRFmxInstrHandle instrumentHandle, char selectorString[], int32 attributeID, int8 attrVal);
Purpose
Sets the value of an RFmx 8-bit integer (int8) attribute.
Parameters
| Input | ||
| Name | Type | Description |
| instrumentHandle | niRFmxInstrHandle | Specifies the instrument session. The RFmx driver obtains this parameter from the RFmxTDSCDMA_Initialize function. |
| selectorString | char[] | Specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. examples: "" "signal::sig1" "result::r1" "signal::sig1/result::r1" You can use the RFmxTDSCDMA_BuildSignalString function to build the selector string. |
| attributeID | int32 | Pass the ID of an attribute. |
| attrVal | int8 | Pass the value to which you want to set the attribute. |
Return Value
| Name | Type | Description | ||||||||
| status | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the RFmxTDSCDMA_GetError function. The general meaning of the status code is as follows:
|
||||||||