RFmxSpecAn Spur Configure Range Number of Spurs to Report (VI)
- Updated2023-10-12
- 2 minute(s) read
RFmxSpecAn Spur Configure Range Number of Spurs to Report (VI)
Owning Palette: SpurSpecifies the number of Spurs that the measurement should report in the frequency range.
Use "range<n>" as the selector string to configure this VI.
Supported devices: PXIe-5665, PXIe-5668
 |
Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI. |
 |
Number of Spurs to Report specifies the number of Spurs that the measurement should report in the frequency range. The default value is 10. |
 |
Selector String specifies a selector string comprising of the signal name and range number. If you do not specify the signal name, the default signal instance is used. The default value is "range0". Example: "range0" "signal::sig1/range0" You can use the RFmxSpecAn Build Range String2 VI to build the selector string. |
 |
error in describes error conditions that occur before this node runs. This input provides standard error in functionality. |
 |
Instrument Handle Out passes a reference of your RFmx session to the next VI. |
 |
error out contains error information. This output provides standard error out functionality. |