RFmxSpecAn ACP Configure Offset Integration Bandwidth (VI)
- Updated2023-10-12
- 2 minute(s) read
RFmxSpecAn ACP Configure Offset Integration Bandwidth (VI)
Owning Palette: ACPConfigures the frequency range, in Hz, over which the measurement integrates the offset channel power.
Use "offset<n>" as the selector string to configure this VI.
 |
Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI. |
 |
Integration Bandwidth specifies the frequency range, in Hz, over which the measurement integrates the offset channel power. The default value is 1 MHz. |
 |
Selector String specifies the selector string comprising of the signal name and offset number. If you do not specify the signal name, the default signal instance is used. The default value is "offset0". Example: "offset0" "signal::sig1/offset0" You can use the RFmxSpecAn Build Offset String2 VI to build the selector string. |
 |
error in describes error conditions that occur before this node runs. This input provides standard error in functionality. |
 |
Instrument Handle Out passes a reference of your RFmx session to the next VI. |
 |
error out contains error information. This output provides standard error out functionality. |