OBW
- Updated2023-10-12
- 1 minute(s) read
OBW
Owning Palette: ConfigurationUse the VIs on this palette to configure occupied bandwidth (OBW) measurements. You can also use the RFmxSpecAn Property Node to configure additional properties.
| Palette Object | Description |
|---|---|
| RFmxSpecAn OBW Configure Span |
Configures the frequency range, in Hz, around the center frequency, to acquire for the measurement. |
| RFmxSpecAn OBW Configure Bandwidth Percentage |
Configures the percentage of the total power that is contained in the occupied bandwidth (OBW). |
| RFmxSpecAn OBW Configure Power Units |
Configures the units for the absolute power. |
| RFmxSpecAn OBW Configure RBW Filter |
Configures the resolution bandwidth (RBW) filter. |
| RFmxSpecAn OBW Configure Sweep Time |
Configures the sweep time. |
| RFmxSpecAn OBW Configure Averaging |
Configures averaging for the occupied bandwidth (OBW) measurement. |
| RFmxSpecAn OBW Configure FFT |
Configures window and FFT to obtain a spectrum for the occupied bandwidth (OBW) measurement. |