NF:Loss:DUT Output:Compensation Enabled Property
- Updated2024-04-10
- 1 minute(s) read
NF:Loss:DUT Output:Compensation Enabled Property
Short Name: NF Output Loss Comp Enabled
Property of RFmxSpecAn
Specifies whether the noise figure (NF) measurement accounts for ohmic losses between the output port of the DUT and the input port of the analyzer.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is False.
| False (0) |
The NF measurement ignores ohmic losses. |
| True (1) |
The NF measurement accounts for the ohmic losses. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |