ACP:Offset:Power Reference:Carrier Property
- Updated2024-04-10
- 1 minute(s) read
ACP:Offset:Power Reference:Carrier Property
Short Name: ACP Offset Pwr Ref Carrier
Property of RFmxSpecAn
Specifies the carrier to be used as power reference to measure the offset channel relative power. The offset channel power is measured only if you set the ACP Carrier Mode property of the reference carrier to Active.
Use "offset<n>" as the selector string to configure or read this property.
The default value is Closest.
| Closest (0) |
The measurement uses the power measured in the carrier closest to the offset channel center frequency, as the power reference. |
| Highest (1) |
The measurement uses the highest power measured among all the active carriers as the power reference. |
| Composite (2) |
The measurement uses the sum of powers measured in all the active carriers as the power reference. |
| Specific (3) |
The measurement uses the power measured in the carrier that has an index specified by the ACP Offset Pwr Ref Specific property, as the power reference. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | RFmxSpecAn ACP Configure Offset Power Reference, RFmxSpecAn ACP Configure Offset Power Reference (Array) |
| Resettable | Yes |