RFmxNR_CHPCfgSweepTime
- Updated2024-10-14
- 1 minute(s) read
RFmxNR_CHPCfgSweepTime
int32 __stdcall RFmxNR_CHPCfgSweepTime (niRFmxInstrHandle instrumentHandle, char selectorString[], int32 sweepTimeAuto, float64 sweepTimeInterval);
Purpose
Configures the sweep time.
Parameters
| Input | ||||||
| Name | Type | Description | ||||
| instrumentHandle | niRFmxInstrHandle | Specifies the instrument session. The RFmx driver obtains this parameter from the RFmxNR_Initialize function. | ||||
| selectorString | char[] | Specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. Example: "signal::sig1" You can use the RFmxNR_BuildSignalString function to build the selector string. |
||||
| sweepTimeAuto | int32 | Specifies whether the measurement sets the sweep time.
|
||||
| sweepTimeInterval | float64 | Specifies the sweep time when you set the sweepTimeAuto parameter to RFMXNR_VAL_CHP_SWEEP_TIME_AUTO_FALSE. This value is expressed in seconds. |
||||
Return Value
| Name | Type | Description | ||||||||
| status | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the RFmxNR_GetError function. The general meaning of the status code is as follows:
|
||||||||