RFmxLTE PVT Configure OFF Power Exclusion Periods (VI)
- Updated2024-04-10
- 2 minute(s) read
RFmxLTE PVT Configure OFF Power Exclusion Periods (VI)
Owning Palette: PVTConfigures the OFF power exclusion periods for the power versus time (PVT) measurement.
Refer to the LTE PVT (Power Vs Time) Measurement topic for more information about OFF power exclusion periods.
 |
Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI. |
 |
OFF Power Exclusion Before specifies the time excluded from the OFF region before the burst. This value is expressed in seconds. The default value is 0. |
|
OFF Power Exclusion After specifies the time excluded from the OFF region after the burst. This value is expressed in seconds. The default value is 0. |
 |
Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default is "" (empty string). Example: "signal::sig1" You can use the RFmxLTE Build Signal String VI to build the selector string. |
 |
error in describes error conditions that occur before this node runs. This input provides standard error in functionality. |
 |
Instrument Handle Out passes a reference to your RFmx session to the next VI. |
 |
error out contains error information. This output provides standard error out functionality. |