RFmxLTE Configure PSSCH Resource Blocks (VI)
- Updated2024-04-10
- 2 minute(s) read
RFmxLTE Configure PSSCH Resource Blocks (VI)
Owning Palette: SidelinkConfigures the start and number of resource blocks allocated for the physical sidelink shared channel (PSSCH) allocation.
Use "carrier<k>" or "subblock<n>/carrier<k>" as the selector string to configure this VI.
 |
Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI. |
 |
Resource Block Offset specifies the starting resource block number of the PSSCH allocation. The default value is 0. |
|
Number of Resource Blocks specifies the number of consecutive resource blocks in the PSSCH allocation. The default value is -1. If you set this parameter to -1, all available resource blocks for the specified bandwidth are configured. |
 |
Selector String specifies a selector string comprising of the signal name, subblock number and carrier number. If you do not specify the signal name, the default signal instance is used. The default value is "subblock0/carrier0". Example: "subblock0/carrier0" "signal::sig1/subblock0/carrier0" You can use the RFmxLTE Build Carrier String VI to build the selector string. |
 |
error in describes error conditions that occur before this node runs. This input provides standard error in functionality. |
 |
Instrument Handle Out passes a reference to your RFmx session to the next VI. |
 |
error out contains error information. This output provides standard error out functionality. |