RFmxLTE Configure Downlink Number of Subframes (VI)
- Updated2024-04-10
- 2 minute(s) read
RFmxLTE Configure Downlink Number of Subframes (VI)
Owning Palette: DownlinkConfigures the number of unique subframes that are transmitted from the DUT.
Use "carrier<k>" or "subblock<n>/carrier<k>" as the selector string to configure this VI.
 |
Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI. |
 |
Number of Subframes specifies the number of subframes to be configured. If you set the DL Ch Configuration Mode property to Test Model, this parameter will be set to 10 for FDD and 20 for TDD by default. The default value is 10. Valid values are 10 to 20, inclusive. |
 |
Selector String specifies a selector string comprising of the signal name, subblock number and carrier number. If you do not specify the signal name, the default signal instance is used. The default value is "subblock0/carrier0". Example: "subblock0/carrier0" "signal::sig1/subblock0/carrier0" You can use the RFmxLTE Build Carrier String VI to build the selector string. |
 |
error in describes error conditions that occur before this node runs. This input provides standard error in functionality. |
 |
Instrument Handle Out passes a reference to your RFmx session to the next VI. |
 |
error out contains error information. This output provides standard error out functionality. |