RFmxLTE Check Measurement Status (VI)

Download PDF

Updated2024-04-10
2 minute(s) read

Owning Palette: Utility

Checks the status of the measurement. Use this VI to check for any errors that may occur during measurement or to check whether the measurement is complete and results are available.

RFmxLTE Check Measurement Status

	Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.
	Selector String specifies a selector string comprising of the signal name and the result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default is "" (empty string). Example: "signal::sig1" "result::r1" "signal::sig1/result::r1" You can use the RFmxLTE Build Signal String VI to build the selector string.
	error in describes error conditions that occur before this node runs. This input provides standard error in functionality.
	Instrument Handle Out passes a reference to your RFmx session to the next VI.
	done? indicates whether the measurement is complete.
	error out contains error information. This output provides standard error out functionality.

RFmx LTE VIs

Table of Contents

RFmxLTE Check Measurement Status (VI)

Log in to get a better experience