RFmxLTE ACP Configure Noise Compensation Enabled (VI)
- Updated2024-04-10
- 2 minute(s) read
RFmxLTE ACP Configure Noise Compensation Enabled (VI)
Owning Palette: ACPConfigures compensation of the channel powers for the inherent noise floor of the signal analyzer.
 |
Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI. |
||||
 |
Noise Compensation Enabled specifies whether to enable compensation of the channel powers for the inherent noise floor of the signal analyzer. The default value is False.
|
||||
 |
Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default is "" (empty string). Example: "signal::sig1" You can use the RFmxLTE Build Signal String VI to build the selector string. |
||||
 |
error in describes error conditions that occur before this node runs. This input provides standard error in functionality. |
||||
 |
Instrument Handle Out passes a reference to your RFmx session to the next VI. |
||||
 |
error out contains error information. This output provides standard error out functionality. |