Advanced:Transmitter Architecture Property
- Updated2024-04-10
- 1 minute(s) read
Advanced:Transmitter Architecture Property
Short Name: Transmitter Architecture
Property of RFmxLTE
Specifies the RF architecture at the transmitter in case of a multicarrier. 3GPP defines different options, each component carriers within a subblock can have separate LO or one common LO for an entire subblock. Based upon the selected option, the additional results are calculated.
The measurement ignores this property when you set the Link Direction property to Downlink.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is LO per Component Carrier.
| LO per Component Carrier (0) |
IQ impairments and In-band emission are calculated per component carrier. |
| LO per Subblock (1) |
Additional subblock based results such as Subblock IQ Offset and Subblock In band emission are calculated apart from per carrier results. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |