SEM:Sidelink Mask Type Property
- Updated2024-04-10
- 2 minute(s) read
SEM:Sidelink Mask Type Property
Short Name: SEM SL Mask Type
Property of RFmxLTE
Specifies the spectrum emission mask used in the measurement for sidelink. Each mask type refers to a different Network Signalled (NS) value. You must set the mask type to Custom to configure the custom offset masks. Refer to section 6.6.2 of the 3GPP 36.521 specification for more information about standard-defined mask types.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is General (NS_01).
| General (NS_01) (0) |
The measurement selects the offset frequencies and limits for the SEM as defined in Table 6.6.2.1G.1.5-1 and Table 6.6.2.1G.3.5-1 in section 6.6.2 of the 3GPP TS 36.521-1 specification. |
| NS_33 or NS_34 (1) |
The measurement selects the offset frequencies and limits for the SEM as defined in Table 6.6.2.2G.1.5-1 in section 6.6.2 of the 3GPP TS 36.521-1 specification. |
| Custom (5) |
You need to configure the SEM Num Offsets, SEM Offset Start Freq, SEM Offset Stop Freq, SEM Offset Abs Limit Start, SEM Offset Abs Limit Stop, SEM Offset Sideband, SEM Offset RBW, SEM Offset RBW Filter Type, and SEM Offset BW Integral properties for each offset. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |