Component Carrier:NB-IoT:NPUSCH:DMRS Base Sequence Mode Property
- Updated2024-04-10
- 1 minute(s) read
Component Carrier:NB-IoT:NPUSCH:DMRS Base Sequence Mode Property
Short Name: NPUSCH DMRS Base Sequence Mode
Property of RFmxLTE
Specifies whether the NPUSCH DMRS Base Sequence Index property is computed by the measurement or specified by you. This property is valid when you set the NPUSCH Group Hopping Enabled property to False, the NPUSCH Format property to 1, and the NPUSCH Num Tones property to 3, 6, or 12.
Use "carrier<k>" or "subblock<n>/carrier<k>" as the selector string to configure or read this property.
The default value is Auto.
| Manual (0) |
The measurement uses the value that you specify for the NPUSCH DMRS Base Sequence Index property. |
| Auto (1) |
The measurement uses the value of NCell ID property to compute the NPUSCH DMRS Base Sequence Index as defined in section 10.1.4.1.2 of the 3GPP TS 36.211 specification. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |