Component Carrier:Downlink:Auto Control Channel Power Detection Enabled Property
- Updated2024-04-10
- 1 minute(s) read
Component Carrier:Downlink:Auto Control Channel Power Detection Enabled Property
Short Name: Auto Control Channel Pwr Detection Enabled
Property of RFmxLTE
Specifies whether the value of PSS Power, SSS Power, PBCH Power, PDCCH Power, and PCFICH Power properties are auto-detected by the measurement or user-specified. Currently, auto-detection of PHICH Power property is not supported. This property is not valid, when you set the DL Ch Configuration Mode property to Test Model. The measurement ignores this property, when you set the Link Direction property to Uplink.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is True.
| False (0) |
The value of the PSS Power, SSS Power, PDCCH Power, PBCH Power, PHICH Power, and PCFICH Power properties that you specify are used for the measurement. |
| True (1) |
The value of the PSS Power, SSS Power, PDCCH Power, PBCH Power, and PCFICH Power properties are auto-detected and used for the measurement. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |