ACP:Offset:EUTRA Offset Definition Property
- Updated2024-04-10
- 2 minute(s) read
ACP:Offset:EUTRA Offset Definition Property
Short Name: ACP EUTRA Offset Definition
Property of RFmxLTE
Specifies the evolved universal terrestrial radio access (E-UTRA) offset channel definition.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
 |
Note In case of non-contiguous, the inner offset channel definition will be configured internally as per the 3GPP specification. Offset power reference for the outer UTRA offsets are set according to ACP EUTRA Offset Definition property. |
The default value is Auto.
| Auto (0) |
Measurement will set the E-UTRA definition and offset power reference based on the link direction. For downlink, the definition is Closest and for uplink, it is Composite. |
| Closest (1) |
Integration bandwidth is derived from the closest LTE carrier. Offset power reference is set to Closest internally. |
| Composite (2) |
Integration bandwidth is derived from the aggregated sub-block bandwidth. Offset power reference is set as Composite Sub-Block. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |